Preparation for Installing a Hot Tub

The hot tub can be an additional relaxation facility in your backyard. Because the hot tub is large and the electrical system is complex, installing a hot tub can be quite complicated. Modern hot tubs can stand alone which means they do not need a water pipe system in their installation. Even so installing it need planning and following city regulations. You can also ask help from hot tub repair lexington sc .

 

Check whether you need a building permit. Many cities need permission to install outdoor hot tubs. Check whether you need to apply for permission from your city government.

Select the location of your hot tub. Make sure the room is large enough for the addition to the hot tub for additional circulation to get out of maintenance activities. The safe area is approximately 3m 3m, but this also depends on the size of your hot tub. Check city development rules to ensure how far from home you can install your hot tub. Many regulations suggest at least 1.5 m distance between your house and your property line. Two other regulations need to be considered when looking for a place for a hot tub. The hot tub must be at least 3 m away from the power cord, and 1.5 m from the spa panel.

Prepare location if needed. The hot tub when full can be 1,361 kg. for this reason you need a strong foundation for the hot tub to be placed. If the foundation is not strong, the risk is that the tubing is damaged and the warranty is invalid. Pouring concrete into concrete plates is a usual way to create a solid foundation. Concrete is a strong foundation. At the same time, the concrete may not be aesthetically good and will stay in the same place even if you move the hot tub.

Another option is a prefabricated spa bearing. These pads are interlocking grids that are easy to install and can be moved if you one day want to move your hot tub. However, spa pads are also not as strong as concrete support. Make sure you have a solid base to work on and choose the most powerful spa pads.